Processing

How to Extract Soybean Oil Easily and Quickly

The extraction process for obtaining soybean oil is nearly the same as those used for other oilseeds.

By Agriculture au Cameroun 2 min read

Farmer working in a soybean field
Contents 4
  1. Hulling the soybean
  2. Grinding
  3. Pressing
  4. Sterilization and purification

The extraction process for obtaining soybean oil is nearly the same as those used for other oilseeds.

There are both traditional processes or methods and modern methods, depending on the equipment used. The steps for extracting this valuable oil are as follows:

Hulling the soybean

This aims to obtain the part of the seed richest in oil. Hulling techniques vary widely, ranging from traditional methods to those using modern technology. But the underlying principle stays the same whether traditional or modern methods are used.

Grinding

This involves grinding the hulled seeds into powder or a fine paste so that every part of the seed, even the deepest, can be reached during the moistening, heating, and pressing stages. This can be done by traditional pounding in a mortar, crushing on stones, or milling the soybeans.

Moistening and heating

This aims to weaken the plant cell walls so that the soybean oil ends up in a state where it can easily be separated from the rest of the cell. This is done by traditionally heating the lightly moistened paste over a fire. For this preparation stage, which is one of the most important, temperature and heating time are key factors, and care must be taken to obtain a good-quality oil. The more it's heated, the better - but care must be taken not to scorch the paste.

Pressing

This is used to separate the oil from the cake. Any pressing method can be used for this, from the most basic traditional tools to the most modern presses available, but the oil obtained this way is crude - meaning it may contain impurities and water, which is why the next step is very important.

Sterilization and purification

This involves separating the pure oil from impurities and water. This is done by heating to a high temperature to evaporate the water, then settling the oil to separate it from impurities in order to obtain a top-quality oil. The oil obtained this way is ready for consumption and can be stored for several months.

Share

Comments (0)

No comments yet. Share your experience or ask your question.

Leave a comment

Never published.

Comments are reviewed before publication.

Back to Processing